I have a wheelbase difference
I have 2.80m left and 2.785 right.
So, she pull to left. and especially when braking.
She must have had an accident, despite the fact that we do not see anything weird.
According to a garage, it would move some mm the crossmember.Mais the garage tells me it's dangerous, he does not want to do.
But for me it's the only way to ride straight.
What do you think?
Vincent
Wheelbase difference (pull to left)
-
- Posts: 21
- Joined: Mon Nov 10, 2014 5:32 am
- Your car is a: Fiat 124 spider 2000 from 1980.
- Location: Jandrain Belgium.
- AndyVAS
- Patron 2018
- Posts: 141
- Joined: Thu May 18, 2017 9:42 am
- Your car is a: 1980 Fiat 124 Spider
Re: Wheelbase difference (pull to left)
Is this being checked wheel center cap to wheel center cap? If so, check from lower control arm mounting bolts to lower trailing arm mounting bolts. Maybe a control arm or trailing arm is bent.
Is the caster the same on both sides? Drastic difference in caster might result in the difference you are seeing.
Is the caster the same on both sides? Drastic difference in caster might result in the difference you are seeing.
Andy Phillips
Vick Auto - Technician, Performance Engine Builder & PFI Developer (with ITBs)
http://www.vickauto.com
Stock parts or Performance parts we've got what you need.
Vick Auto - Technician, Performance Engine Builder & PFI Developer (with ITBs)
http://www.vickauto.com
Stock parts or Performance parts we've got what you need.
-
- Posts: 21
- Joined: Mon Nov 10, 2014 5:32 am
- Your car is a: Fiat 124 spider 2000 from 1980.
- Location: Jandrain Belgium.
Re: Wheelbase difference (pull to left)
Thanks, good idea, il will check.
Geometry has been check by a specialist, and he has found a big difference in the caster Angle.
All the other point are +- correct; parralelism, camber.
Thanks.
Vincent.
Geometry has been check by a specialist, and he has found a big difference in the caster Angle.
All the other point are +- correct; parralelism, camber.
Thanks.
Vincent.