Custom Performance Clutch Disc

[So Cal Mark]

I got a request from an owner to build a clutch that could handle his 250ft lbs of torque. Our performance pressure plate will already handle that load, so all we needed was a clutch disc. Here is what our clutch mfg built. It's a 4 button disc with ceramic pucks

[adrians]

An How Much ?

[So Cal Mark]

the disc and pressure plate set is $300

[boogiedude]

Direct bolt up for all years? Any modifications needed? Works with all other existing hardware(throwout bearing etc)?

[redek]

Thanks to Mark for offering new products for our spiders. Even though I won't be needing this for my stock drivetrain.
Derek

[So Cal Mark]

no mods required, but the ceramic disc is a bit harsh for normal street use. This is definitely recommended for real performance use. We do offer a disc for street use and it's less expensive. The pressure plate we use for both systems is the same and will easily handle the 250 ft lb of torque without increasing pedal pressure