ignition relay set
-
azruss
- Posts: 3659
- Joined: Sun May 30, 2010 12:24 pm
- Your car is a: 80 Fiat 2000 FI
ignition relay set
Finished my 4 relay set for unloading the ignition switch. This design does not change any of the terminal functions of the key. this will mount under the front cowl. i will use dynamat to seal the cowl hole. I have bench tested the unit and all seems well. should just plug and play. will mess with install this weekend if the rains let up. No electrons or relays were harmed in making this system.
-
narfire
- Posts: 3959
- Joined: Sat Dec 27, 2008 2:14 am
- Your car is a: 1980 124 spider
- Location: Naramata B.C.
Re: ignition relay set
Man, what a great skill to have.
I just finished wiring in a relay for the after market fuel pump and will have a fire extinguisher handy when first trying it out.
Dad's an electrcal engineer but I now realize knowledge is not transfered by osmosis
I just finished wiring in a relay for the after market fuel pump and will have a fire extinguisher handy when first trying it out.
Dad's an electrcal engineer but I now realize knowledge is not transfered by osmosis
80 FI spider
72 work in progress
2017 Golf R ( APR Stg. 1)
2018 F350 crew long box
72 work in progress
2017 Golf R ( APR Stg. 1)
2018 F350 crew long box
-
westy64
Re: ignition relay set
nice job !
hope it will fire first trial, so you don't have to remove the cowl all the time !
hope it will fire first trial, so you don't have to remove the cowl all the time !
-
azruss
- Posts: 3659
- Joined: Sun May 30, 2010 12:24 pm
- Your car is a: 80 Fiat 2000 FI
Re: ignition relay set
Electrical requires patience, planning and an unrelenting attention to detail. I've very nervous about the 1st time it gets switched on know it could melt all the wiring in the car. everything tested ok in the bench test. Here is the detail of how the relays are integrated into the wiring harness.
