Excessive heat on the passenger side

[70spider]

Great idea on replacing the stock screws with allen head bolts . Getting to the bolts is the problem my seats do not move all the way back or forward so I can not access them with a normal screwdriver, even after cleaning and lubing them with lithium greese. I will definitly replace them with the allens.
Thanks, Pesto

[azruss]

I used allens and they were too fat. I had to sand down the OD a bit to get them to seat.

[4uall]

you may have to give the lube/oil/grease some time to penetrate then re-apply dont be afraid to put a little force when trying to move the seats back & forth

had zero issues using these bolts

I actually picked up 8 8mm hex bolts and used the allen key without even moving the seats to install them pics tomorrow