Shifter spinning
-
- Posts: 4
- Joined: Wed Sep 04, 2024 9:25 pm
- Your car is a: 1978 Fiat Spider 124
Shifter spinning
I have ‘78 Spider, 5-speed. Shifting is smooth. However, the shifter (not the knob) spins. I think that only the upper lever is spinning as is freely rotating on a tight axis—like unscrewing a bolt or screw. I am considering replacing the bushings/clips that connect the upper and lower levers to see if this will fix the issue. I’m a novice and would appreciate any feedback/thoughts.
-
- Patron 2022
- Posts: 823
- Joined: Sat Jan 30, 2010 7:58 pm
- Your car is a: 1979 spider 2000
- Location: Charlotte, NC
Re: Shifter spinning
That's working the way it's supposed to. Mine has been doing that since new.
1979 Fiat Spider (since new)
2005 Lincoln LS (the wife's car)
2003 Chevrolet Cavalier (daily driver)
1999 Honda Shadow VLX 600
1972 Grumman Traveller 5895L (long gone).
2005 Lincoln LS (the wife's car)
2003 Chevrolet Cavalier (daily driver)
1999 Honda Shadow VLX 600
1972 Grumman Traveller 5895L (long gone).
-
- Posts: 3798
- Joined: Fri Mar 15, 2019 11:23 pm
- Your car is a: 1969 and 1971 124 spiders
- Location: San Francisco Bay Area
Re: Shifter spinning
As mentioned above, many of the shift levers spin. However, while they can turn if you turn them, the chrome shift lever extension should not freely rotate on its own. Or rattle.
As you mentioned, you might have missing or worn out shift lever bushings:
https://autoricambi.us/shifter-extension-bushing-kit/
-Bryan
As you mentioned, you might have missing or worn out shift lever bushings:
https://autoricambi.us/shifter-extension-bushing-kit/
-Bryan
-
- Posts: 4
- Joined: Wed Sep 04, 2024 9:25 pm
- Your car is a: 1978 Fiat Spider 124
Re: Shifter spinning
Bryan/Bob,
Thanks for the response. Very helpful.
Chris
Thanks for the response. Very helpful.
Chris