Wheels

vinnypew · Post by **vinnypew** » Mon Nov 17, 2008 11:35 am

Hi everyone, I am looking at buying some used but good "FIAT SPIDER 124/2000 13" ALLOY WHEELS-USED" for my 1978 124 1800.
Can someone tell me if they will fit ?(Before I buy them). Thanks

mdrburchette · Post by **mdrburchette** » Mon Nov 17, 2008 1:47 pm

The wheel bolt pattern is the same on all our Fiat Spiders. Have you got a pic of the wheel?

vinnypew · Post by **vinnypew** » Mon Nov 17, 2008 2:47 pm

mdrburchette wrote:The wheel bolt pattern is the same on all our Fiat Spiders. Have you got a pic of the wheel?

That's great, thanks. I do not have any pictures of the rims, but they are on the car that he is parting out. I am going to pay around $420 for the four rims I think that's ok.

ronarthur · Post by **ronarthur** » Mon Nov 17, 2008 3:05 pm

Sounds kind of high to me??? I am selling an 81 this weekend that had 5 factory aluminum wheels that I would have sold for less than that. Maybe I'm not comparing apples to apples though.

vinnypew · Post by **vinnypew** » Mon Nov 17, 2008 3:21 pm

ronarthur wrote:Sounds kind of high to me??? I am selling an 81 this weekend that had 5 factory aluminum wheels that I would have sold for less than that. Maybe I'm not comparing apples to apples though.

I am paying about 45 per rim and the rest is shipping from Kansas, USA to Ontario, Canada.

ronarthur · Post by **ronarthur** » Mon Nov 17, 2008 3:28 pm

That's a shame that shipping each wheel cost the same as the wheel itself. But, if the wheels are nice and it makes the car look better, it will be worth it. It would have been nice if you could have got some pictures though. That way, you could see what you were getting.

mdrburchette · Post by **mdrburchette** » Mon Nov 17, 2008 4:14 pm

If they're nice Cromadoras or turbo wheels that price is very good. I won't even tell you how much I have in mine.

ronarthur · Post by **ronarthur** » Mon Nov 17, 2008 4:16 pm

That's because you didn't buy mine!!

racydave · Post by **racydave** » Mon Nov 17, 2008 5:59 pm

I wanted the Roosevelts so I could be like Alvon. Paid a premium price, but their exactly what I wanted. The wifey did not have a good imagination, and was sour when she first saw them. But changed her mind when they were cleaned , painted and on. My buddie did a "force-balance" on them, matching the tires to the rims. This brought the road force numbers low, and they are very round! What can I say, it was my birthday!

kristoj · Post by **kristoj** » Mon Nov 17, 2008 6:02 pm

mdrburchette wrote:If they're nice Cromadoras or turbo wheels that price is very good. I won't even tell you how much I have in mine.

The turbo wheels are 14", not 13", so it would be them.

Europa · Post by **Europa** » Mon Nov 17, 2008 7:02 pm

I am paying about 45 per rim and the rest is shipping from Kansas, USA to Ontario, Canada.

These?
http://cgi.ebay.com/ebaymotors/FIAT-SPI ... ht_610wt_0

4babycar · Post by **4babycar** » Mon Nov 17, 2008 10:10 pm

I saw these in CL and armed with the ebay information I would think you could talk them down and hopefully end up in the positive and with tires too. Though, it does seem like $450 is the going rate in some circles.

http://vancouver.en.craigslist.ca/pts/918868424.html

mdrburchette · Post by **mdrburchette** » Tue Nov 18, 2008 6:18 am

That second set looks like the Shelby wheels I have on my 72!

vinnypew · Post by **vinnypew** » Wed Nov 19, 2008 8:45 pm

Well I bought the rims from Kansas. The sell was really good. worked out shipping and it won't be that bad to get them here thanks for the help

Brian

So Cal Mark · Post by **So Cal Mark** » Wed Nov 19, 2008 9:29 pm

post some pics when you get them mounted

Wheels

Wheels

Re: Wheels

Re: Wheels

Re: Wheels

Re: Wheels

Re: Wheels

Re: Wheels

Re: Wheels

Re: Wheels

Re: Wheels

Re: Wheels

Re: Wheels

Re: Wheels

Re: Wheels

Re: Wheels