camhousing switch

Keep it on topic, it will make it easier to find what you need.
Post Reply
User avatar
Tappy
Posts: 721
Joined: Wed Apr 02, 2008 8:22 pm
Your car is a: 124 spider 2000 1979
Location: Belgium ; Centre Of Europe

camhousing switch

Post by Tappy »

i 've poliched up an older camshaft housing , it now seems to be nicer then the existing one can i switch the cams and buckets to the old one ? the old one hads a flatted lobe so i nee to change the cam an pully , but would that require resetting the valves ? the 're just been done ....
FineItalianAutomobile TechnologyImage

pls don't see what i write , read what i mean
Top
So Cal Mark

Re: camhousing switch

Post by So Cal Mark »

yes, you have to adjust the valves
Top
Post Reply

Return to “Engine and Tuning”