I have my new clutch kit (and flex disc while I'm at it). The tranny is enroute from Jon at Midwest 124, now for the question. I read on the forum somewhere that there is an allignment tool that works on the Spider that is for an American car. I forgot to order the tool, so I'm hoping that I can get one that will work locally. Anyone know which one it is?
Thanks folks.
Ron
clutch allignment tool
-
rlux4
- Patron 2022
- Posts: 4211
- Joined: Thu Jan 10, 2008 8:32 pm
- Your car is a: 1982 2000 Spider
- Location: Granite Falls, Wa
-
mdrburchette
- Posts: 5754
- Joined: Wed Jan 25, 2006 5:49 am
- Your car is a: 1972 Fiat 124 Sport
- Location: Winston-Salem, NC
Re: clutch allignment tool
I used one for a Ford Mustang.
1972 124 Spider (Don)
1971 124 Spider (Juan)
1986 Bertone X19 (Blue)
1978 124 Spider Lemons racer
1974 X19 SCCA racer (Paul)
2012 500 Prima Edizione #19 (Mini Rossa)
Ever changing count of parts cars....It's a disease!
1971 124 Spider (Juan)
1986 Bertone X19 (Blue)
1978 124 Spider Lemons racer
1974 X19 SCCA racer (Paul)
2012 500 Prima Edizione #19 (Mini Rossa)
Ever changing count of parts cars....It's a disease!
-
rlux4
- Patron 2022
- Posts: 4211
- Joined: Thu Jan 10, 2008 8:32 pm
- Your car is a: 1982 2000 Spider
- Location: Granite Falls, Wa
Re: clutch allignment tool
Thanks Denise. I was thinking the post I referred to was yours.
-
baltobernie
- Patron 2020
- Posts: 3466
- Joined: Sun Nov 25, 2007 6:00 pm
- Your car is a: 1973 Spider [sold]
- Location: Baltimore, MD
Re: clutch allignment tool
I have one if you want.
Bernie
Bernie
-
rlux4
- Patron 2022
- Posts: 4211
- Joined: Thu Jan 10, 2008 8:32 pm
- Your car is a: 1982 2000 Spider
- Location: Granite Falls, Wa
Re: clutch allignment tool
Thanks Bernie, but before you go to the trouble of shipping, now that the tranny is out I've got the diameter of the front shaft and a new clutch for spline size, so I should be able to get one locally. Don't throw yours away yet though, I could be wrong.
Ron
Ron