how to fix this?????

81SPIDERMATT · Post by **81SPIDERMATT** » Tue Aug 21, 2012 11:34 am

opened the door and this fell off.....

looks like it used to be riveted on

guessing that i should drill out old rivet and use some type of screw... or should i leave the old rivet for "meat" for the new screw.....

i also worry that a screw will hit the windshield edge and crack it
also appears tho have been some type of sealant or glue between... would love some advise on that also
any advise would be appreciated.... thanks... matt

So Cal Mark · Post by **So Cal Mark** » Tue Aug 21, 2012 3:24 pm

pop rivets

81SPIDERMATT · Post by **81SPIDERMATT** » Tue Aug 21, 2012 3:33 pm

So Cal Mark wrote:pop rivets

no goop ?? no glue??

dang i was just at the hardware store too.... new pop rivet gun is in my future

DRUMMOND · Post by **DRUMMOND** » Mon Aug 27, 2012 9:50 pm

1/8" pop rivets and some seam sealer. Drill out the old rivets with 1/8" drill bit. Seam sealer will help stop it from moving every time you close the door or top. that's why it falls off over time.

81SPIDERMATT · Post by **81SPIDERMATT** » Mon Aug 27, 2012 10:28 pm

DRUMMOND wrote:1/8" pop rivets and some seam sealer. Drill out the old rivets with 1/8" drill bit. Seam sealer will help stop it from moving every time you close the door or top. that's why it falls off over time.

thanks.... 1/8 and seam sealer.... got it

how to fix this?????

how to fix this?????

Re: how to fix this?????

Re: how to fix this?????

Re: how to fix this?????

Re: how to fix this?????