urethane bushing

[fiat218]

has any one got theses , upper and lower. i am assuming for the control arms
where do you get them


Bests springs for lowering the car and shocks ?
Some one must know

[ClarkTheShark]

Surely there is a urethane bushing that is pretty close if not dead on the same size as the other bushings. Can always dress em' up on the grinder to make them fit too.

[fiat218]

Surely there is a urethane bushing that is pretty close if not dead on the same size as the other bushings. Can always dress em' up on the grinder to make them fit too.

Ok, and who and where do I get them

[engineerted]

Jim,

I bought a set from Vicks last year, and just completed the install. No issues, but I haven't had a chance to take the car out, long winter here in Michigan.

[fiat218]

Jim,

I bought a set from Vicks last year, and just completed the install. No issues, but I haven't had a chance to take the car out, long winter here in Michigan.

Ok great,

[fiat218]

I got source of all I need other then lowered new springs and 1" sway bar, I know mark has the sway bar
What about springs, how do you know what your buying

[So Cal Mark]

SuperPro makes a full set of front and rear urethane bushings specifically for the Spider

[fiat218]

i got a email from vandor, he has all i need except the sway bar and springs, i already got a sway bar ordered this morning from greg ( marks shop
i like talking to greg, he makes me laugh

[v6spider]

Mark,
Do you know pricing on those urethane bushings?
Who is the USA distributor?

Thanks!
Rob

[So Cal Mark]

Superpro has a new US distributor in N Cal, I'll have to look up who it is

[narfire]

Jim, I'm really happy with the IAP red springs with the Koni yellow shocks. I did not have to cut the springs to lower the car and with the 15 inch wheels sits nice and handles great I think. I have the 1" front sway bar as well.
Chris

[fiat218]

Jim, I'm really happy with the IAP red springs with the Koni yellow shocks. I did not have to cut the springs to lower the car and with the 15 inch wheels sits nice and handles great I think. I have the 1" front sway bar as well.
Chris

ok, great, that what info i need, i will get the shocks and springs from them

odd ball colors, but beek can change the color

[Holshot]

Hey Mark,

What are your thoughts on these guys?

http://www.ebay.com/itm/110912338030?ss ... 1423.l2649

I needed to replace mine and found these on eBay... They look nice and the seller claims no noise issues.

Thanks advance!

[fiat218]

http://www.superpro.com.au/find-superpr ... r/20-24-29
you see that list of bushing? do i need to order all that for my spider . so then it complete

will some one look at this and let me know, im just not sure what i am doing. thanks

[cormac]

http://www.superpro.com.au/find-superpr ... r/20-24-29
you see that list of bushing? do i need to order all that for my spider . so then it complete

will some one look at this and let me know, im just not sure what i am doing. thanks

Jim - I was on their site last night trying to figure it out...ran out of time and patience , and since I won't need them for a while yet, decided to pass...hoping somebody else would venture forth hehehe

sorry, I couldn't resist the attempt at humor...I sent them an email to find out if they have an all inclusive kit, if I don't hear from them (5:35 AM Monday there now), I might call them or go to site and do it long hand...

Dave