I have to replace the front brake hoses and drivers side steel brake line. I've been to every parts dealer in town and they can't get lines with the correct fittings. NAPA is telling me the fitting is a MX10 125 which they can't get.
Any suggestions on parts dealers? Any other options for a novice?
Brake line fittings
Re: Brake line fittings
I have the stainless braided hoses in stock, and I should have a used left front hard line
Re: Brake line fittings
Mark:So Cal Mark wrote:I have the stainless braided hoses in stock, and I should have a used left front hard line
The braided brake hoses accomodate the original fittings? What is the cost for the two front hoses and the fixed line?
I believe that everything on this car is original. Are the fitting thread and size consistent with what Fiat put on these cars in 78?
Sorry to ask so many questions. It's getting frustrating to start things on this car and run into a roadblock and have to wait several days for parts and find out their the wrong size.
Re: Brake line fittings
the braided hoses use the same size fittings as the oem hoses. I'll send a pm about pricing, so check your messages