Fiat Lovers,
Inside the window attached to the top of the metal part of the door panel is a metal strip. It is riveted on and covered (or supposed to be covered) in a felt material with a cloth backing. I think it is called a window "scraper" because it seals the hole in the door and scrapes the mist off the window when you role it down if its nice and tight.
Anyway....I need some for both doors as I have just completely rebuilt my door panels and these things are tatty.
Anyone have this stuff or know where I can get it?
Thanks,
FOUND: Restoration Specialties and Supplies: 814-467-9842. Part YM30-72. They also make a 96 inch length (YM30-96). It is called "belt weatherstip".
Inner Door Window "scraper" felt needed. (FOUND)
-
- Posts: 198
- Joined: Mon May 17, 2010 4:54 pm
- Your car is a: 1976 124CS1 Spider
Inner Door Window "scraper" felt needed. (FOUND)
Last edited by mPedro08 on Thu Jul 15, 2010 10:50 am, edited 1 time in total.
Re: Inner Door Window "scraper" felt needed.
Try this link out. Pope posted some contact info in it that you may be able to source it from. I never used it so I'm not sure if it's still available.
http://www.fiatspider.com/f08/viewtopic ... indow+felt
Rick
http://www.fiatspider.com/f08/viewtopic ... indow+felt
Rick
-
- Patron 2018
- Posts: 579
- Joined: Sat Mar 22, 2008 8:45 am
- Your car is a: 1979 Fiat 2000
- Location: Mississauga Ontario Canada
Re: Inner Door Window "scraper" felt needed.
T
he post that Pope showed for the fuzzs is great for I purchased them and are the same as OEM.
he post that Pope showed for the fuzzs is great for I purchased them and are the same as OEM.
-
- Posts: 198
- Joined: Mon May 17, 2010 4:54 pm
- Your car is a: 1976 124CS1 Spider
Re: Inner Door Window "scraper" felt needed. (FOUND)
Thank you all, took a little while to get through to them but they have the part still and are cutting up and sending it out today.
PERFECT!!!
You guys on this forum are simply the best.
PERFECT!!!
You guys on this forum are simply the best.
-
- Patron 2020
- Posts: 3466
- Joined: Sun Nov 25, 2007 6:00 pm
- Your car is a: 1973 Spider [sold]
- Location: Baltimore, MD
Re: Inner Door Window "scraper" felt needed. (FOUND)
You can also get this and some other weatherstripping components from good old J C Whitney. They often offer "free shipping" during promotions, which is important because the fuzz comes in long (as in UPS "oversize") lengths.
-
- Posts: 198
- Joined: Mon May 17, 2010 4:54 pm
- Your car is a: 1976 124CS1 Spider
Re: Inner Door Window "scraper" felt needed. (FOUND)
Baltobernie,
The link in the stream above suggested JC Witney stopped selling the stuff and you can get this vendor (and if they have it most likely JCW) to cut it to save shipping. I had it cut into three pieces and good to go.
The link in the stream above suggested JC Witney stopped selling the stuff and you can get this vendor (and if they have it most likely JCW) to cut it to save shipping. I had it cut into three pieces and good to go.